Tag Archives: 麒麟丸

Building a Gozabune (Kobaya) from Paris Plans – Part 13

Posted on by
4
An update on this model is long overdue, and while I haven’t really been working much on the Kobaya model, it is a model that I’ve been very happy with. I’ve recently been researching old drawings, looking for atakebune information, but mostly finding sekibune and other small ships. As a result, I’ve found something of a renewed interest in finishing my kobaya model, and started working on it again.
The model keeps inching closer to completion, with the biggest hold-up being the making and mounting of the ship’s 28 sculling oars. Given the size of a person on the model, the deck would have been crowded with oarsmen. With such a sharp hull and relatively small size (17m) in comparison with the largest of ships at the time (30m, give or take), those 28 oars must have made her very fast.
However, Japanese sculling oars are more complicated in shape than western-style oars, so this project involves cutting and shaping 56 pieces of wood, plus the addition of bindings, handle, and mounting yoke onto each oar. So, I have my work cut-out for me.

Continue reading →

Building a Gozabune (Kobaya) from Paris Plans – Part 12

Posted on by
2
Work on the Kobaya is moving forward again. While coming up with a way to deal with the decorative patterns on the hull has held me up, I did have some ideas. But, the best I could think to do required the use of a new tool, and it took me a while to bight the bullet and buy it.

Note the pattern of the chain of hexagons and what look like little sunbursts in the Paris drawings.

The solution I came up with was to either create a mask for painting or possibly for the application of gold leaf, or to simply cut a pattern that was itself gold leafed. This probably sounds more complicated than it turned out to be. The central part of the solution turned out to be the use of a vinyl cutter, like those used in scrapbooking.
After looking at a few of the leading models, I finally made the leap and bought a Silhouette Cameo 3. I found one for about $200 online and spent another $150 or so on materials and accessories.
The closest competitor to this was the Cricket Maker, but it was more expensive and the drawing software was only usable online, requiring an internet connection to use. Having Internet is not an issue, but requiring it to use my own hardware or even to create drawings was not an idea I like supporting.
I was able to test out Silhouette’s drawing software for the Cameo, which was available as a free download from their website. That allowed me to determine that I would at least be able to create drawings of the things I needed it to cut.

Continue reading →

Building a Gozabune (Kobaya) from Paris Plans – Part 11

Posted on by
Reply
A yakata for the kobaya?
I’ve been looking at the yakata, or deck cabins, on the paintings of kobaya. Also, there is one from a larger gozabune that was removed and restored and on display at the museum at Kumamoto Castle. I’ve been in touch with ship modeling colleagues in Japan and they told me that it is from a ship called the Naminashi-maru (波奈之丸).

The restored yakata from the Naminashi-maru at the museum of Kumamoto Castle.

I’m still very confused about the dimensions. To me it looks very low, but I’m told the lower level is 1.7 to 2 meters high on the inside. Part of this, I assume is because the floor is below deck level, which is the case on my kobayabune.
To aid in design of the yakata, I’ve fitted a removable cardboard structure. This gives me a sense of size and appearance. I can’t really add the structure without the attendant framework over the whole ship for an awning.
I drew in some outlines for sliding doors and a railing atop the structure. Apparently, the passengers would also sit atop the structure. I’m not sure how they would climb up, but I’m assuming it would be with a “leg up” from one of the attendant samurai on the deck.

Continue reading →

Building a Gozabune (Kobaya) from Paris Plans – Part 10

Posted on by
Reply
It’s been well over a month since I last posted my progress on the Kobaya-bune. And, while it doesn’t look much different, I did complete the deck planks and gave the hull a couple coats of gloss polyurethane, in an attempt to simulate the lacquer used on the real vessel.

I must have put on thick coats, because the surface has been tacky for a while. It doesn’t help that the weather is a little on the damp and cool side. No matter, I’m not really prepared for the next step, which is to add the decoration, as well as the metal mortise covers, etc.

Continue reading →