Here is some information on measurements in the Japanese unit called the shaku that I just put together. I discovered that information like this is in my notes somewhere, but I often don’t know where I put them. So, for easy future reference, and for your benefit too, I just added this info to a new page under the Resources menu and called it Japanese Measurements.
Something you’ll commonly find here on Wasen Modeler is mention of measurements in traditional Japanese units. I do this as an “Extension Student” of Japanese traditional boatbuilding. The basic unit is the shaku. The Japanese have two different kinds of shaku, one use by taylors and one used by carpenters. What we use here, the one for carpenty, is technically a kanejaku (kah-ney-jah-coo), but is simply called a shaku.
One shaku is almost exactly equal to one foot, but specifically 1 shaku = 11.9 inches. The shaku is divided up into 10 units called sun (soon), each sun is diving into 10 units called bu (Boo), and each bu is divided into 10 rin.
Shaku = 11.9 inches
Sun = 1-3/16″
Bu = about 1/8″
Rin = a bit under 1/64″
For the metric builders out there, a shaku is about 10/33 of a meter or 30.3cm
Shaku = 10/33m or 30.3cm
Sun = 1/33m or 3cm
Bu = 1/330m or 3mm
Rin = 1/3300m or 0.3mm
The best way to use Japanese units is to simply invest in a Japanese tape measure or square. These are a bit pricey, but very handy, particularly if you can work in 1/10-scale, which is nice, convenient scale for modeling smaller wasen. At this scale, the only conversion necessary, is to move the decimal place over by one digit.
Being in the San Francisco Bay Area, I’m lucky enough to have access to two Japanese hardware stores. For those less fortunate, you can order online from Hida Tools in Berkeley, where I’ve purchased the few Japanese tools I own. You can find them on the web at http://www.hidatool.com.
The one I use is a 5 sun by 10 sun square, but if you click on this link to buy it, just be aware that they posted the wrong photo on their website and show the 2.5 sun by 5 sun square. The smaller squares are certainly much cheaper, and they have the advantage of laying flat – the large square is has a thicker corner for strength. The 2.5 sun by 5 sun square looks nice, and there is a smaller 1.5 sun by 3 sun square that’s only $10.