Category Archives: Higaki Kaisen

Higaki Kaisen Article Part 3

Posted on by
Reply

The third and final part of my Higaki Kaisen build article is out with the latest issue of Seaways’ Ships in Scale. While I was actually relieved to see the previous article, so those building the kit would have the information I’m trying to pass along, it’s kind of sad this time around. Though I’ve had other multi-part articles published in the magazine, I’d really like to keep writing about this kit to generate more interest in this and other Woody Joe kits.

Of course, there are other Woody Joe kits to write about. It’s been my plan to write about building the Hacchoro with modifications based on my visit to the replica boats in Yaizu harbor. But, it takes time and I have other projects I need to be working on. So, finding time for that one will be a bit rough.

But, at least all the information on the kit is in print, and hopefully, interested model builders will take advantage of the information, go out and buy the kit, and have a fun and successful build.

 

Of course, I’ll keep posting info about this and other traditional Japanese watercraft here. So, stay tuned!

Japanese Wasen Model Display in San Francisco

Posted on by
Reply

This week has been a kind of crazy week of dealing with the display of ship models. I now have 4 models out on display. Two of them are part of a display at the San Mateo County Fair headed up by the South Bay Model Shipwrights club. The other two are part of my own display that I’ve put together in the big window of Union Bank’s community room in Japantown, San Francisco.

The models are my Higaki Kaisen and Hacchoro models that I built from Woody Joe kits. The display is my second now, and I’ve learned a lot from my first display that I put up earlier in the year. That display was small for the window area and the models were hard to see and the display was not very attention grabbing.

This time around, I’ve had posters printed up using some new photos I’ve taken. I mounted these on foam core poster boards and also set up a large display board with 8″x10″ photos showing details of the models. To make the models easier to see, I removed them from their cases and raised them up closer to eye level by placing them on some pedestals I made from MDF board.

At the last minute this morning, I cut some acrylic sheet into strips and made some plastic clips to hang the posters from. The strips were cut to size and drilled and then heat bent to shape using a small torch. They aren’t perfect, but they work.

Late this morning, I crammed everything into my car and drove to San Francisco to set it all up.

IMG_1091

Models set up and ready to put on display.

IMG_1088

Homemade clips for hanging the posters.

This time, with all the display elements, it took me a lot longer to set up than I’d expected. I could imagine what it’s like to work setting up displays in department store windows. Overall, it was a good 45 minutes to bring everything up from the parking garage and to set it all up. The posters and the hangar clips took the most time to set up so that the posters hung at the right heights.

I felt I was kind of rushing the layout. It would definitely be helpful to get a second person to help with this so that one person can look at it and recommend adjustments while the other put the display elements into place.

In the end, I think it all worked pretty well and I’ve definitely got thoughts of Wasen Display 3.0 starting to develop. Having the third model will be good, which will most likely be Woody Joe’s Yakatabune as that’s a nice looking model and a quick build.

IMG_1093

Higaki Kaisen model.

IMG_1092

Photo Board and Hacchoro model. Note the hanging posters.

One thing I realized was that every time I’m in the mall where I have time to take photos, it’s roughly noonish and the sun comes streaming straight down through the skylights in the mall. So, I mostly get a lot of glare in these photos. I think at other times of the display, it is much easier to see the models and photos. I’m going to have to check out that theory and take some photos maybe late in the day or evening early evening. Maybe I can get some decent photos of the display then.

IMG_1096

A much improved display over the last one.

Wasen Display 2.0 will run from Friday, June 5th through Friday, July 10th. I hope you will stop by to see it and let me know what you think!

Higaki Kaisen Display at San Francisco’s Japan Center

Posted on by
1

It’s official, my Higaki Kaisen model is now on display in the East Building of the Japan Center Mall in San Francisco’s Japantown. The model is in the window display of Union Bank’s Community Room.

The model is in a case made using a Woody Joe case kit. I made a couple informational displays to go with it. Sorry about the quality of the photo. Shooting through glass in brightly lit open area doesn’t work out so well. Maybe with a polaroid filter – do they make those for iPhone cameras?

IMG_0764

My Higaki Kaisen model in the window display at Union Bank’s Community Room in San Francisco’s Japantown.

The bank administrator was very happy with the display and cleared out all the general promotional bank stuff that’s normally in there. The model will be on display from now until about April 3rd, when SF Cherry Blossom set up takes place and a Japanese doll display goes in. We’ve already discussed the possibility of bringing the model back after some time in May when the display case may become available again.

IMG_0762

The display is right off this open courtyard. What looks like a bridge is actually a stairway.

The only thing is that the model looks awfully lonely in the big display window. We both agreed that there should be two other models to accompany it – the display window is just laid out perfectly for that.

IMG_0767

My model seems sad to be all alone in the big window.

Now, I do have a partially completed Hacchoro model, which will actually be larger than the Higaki Kaisen model since it is at 1/24 scale. I just need to finish it and get another display case. Not sure what to do about the empty third spot. I have the large Sengokubune kit, but it’s unstarted, and there’s no way I can justify taking the time to build it with all these other projects waiting for me.

Woody Joe’s 1/24-scale Yakatabune kit is a possibility as it’s almost identical to the Hacchoro in construction except that instead of all the oars and sails and accompanying details, it just has a deckhouse. That would be a pretty quick build and it would fit the theme very well.

Lastly, because of the low position of the floor of the window display, a friend of mine was suggesting maybe putting in some kind of box stand. I suppose anything would work. Lot of possibilities here. Almost screams for some kind of diorama.

Thinkin’, thinkin’…

 

Higaki Kaisen in NRG Journal

Posted on by
2

I got a nice surprise a couple months ago when the editor of the Nautical Research Journal, Paul Fontenoy, asked me to submit a short article on my Higaki Kaisen model. So, a while back, I sent him some photos to use and a very short write-up with some captions to accompany the photos. Then, I got an even nicer surprise when I was told the model would appear on the cover.

Cover NRJ 59-3 for Web-1

Having been an NRG member/supporter and having long admired the models that have graced the pages of the Journal, this was a really tremendous honor. Now, I’ll have to admit, it really the model subject and the uniqueness of the kit that got the model on the cover and not my artistry or craftsmanship. But, still it’s pretty nice to see it there.

Of course, being that I’ve been advocating Woody Joe kits here, it’s great to get people’s attention this way. I got an extra copy of the issue and sent it Woody Joe and they should be receiving it any time now. I’m sure they’ll be very happy to see their kit receive such attention.

The timing of this article probably couldn’t be any better, as I just submitted the proofs for my Higaki Kaisen kit review article, which will appear in Seaways’ Ships in Scale in the next few weeks. As for my history/build article for Ships in Scale, I’ve been getting pretty distracted with all the projects I’m trying to get done. But, with these articles both out in August/September, I’ll need to get back on it very soon.

But, while I’m mentioning the NRG here, I would like to say that this is a really fine organization, dedicated to ship modeling, and it deserves and needs your support. It’s not all academic and it’s not about being “purists” or anything of the like. The tagline “Advancing Ship Modeling Through Research” is just to say it’s about making better models, it’s about helping the modeler make better models, it’s about getting help to build better models.

Seeing my own model on the cover, I can’t help but wonder when the last time was that a kit build was featured on the cover? Times really do change. So, join the NRG. It’s a great organization, you’ll be supporting a great cause (ship modeling) and you’ll get your quarterly issue of the Journal!