Author Archives: catopower

Unknown's avatar

About catopower

Ship modeling since 1993.

Building the DNB Maru – A Niigata Honryousen

Posted on by
Reply

In 2019, boat builder Douglas Brooks had developed a project together with Nina Noah of an organization called The Apprenticeshop, to go to Japan and build two traditional Japanese boats with two different Japanese boat builders.

The two boats were a Niigata kawabune called a honryousen built with Mr. Nakaichi Nakagawa, and a Himi Tenmasen, built with Mr. Mitsuaki Bansho.

Photo courtesy of Douglas Brooks

The Honryousen, or simply Honryou, is a riverboat built in a style called itaawase, which simply means “plank joined”. That the term refers to a boat built entirely of planks, including the bow and stern – basically one with no cutwater. While not exclusive to Niigata prefecture, this was very common on the rivers there.

The Honryousen that Douglas Brooks built was dubbed “DNB Maru”, named for Douglas, and the two people from the Apprenticeshop that came with him to Japan, Nina Noah and Ben Meader.

If you would like to read about the two projects and view a couple videos, I recommend visiting the Apprenticeshop blog here: https://www.apprenticeshop.org. Continue reading →

2020 New Year’s Explosion of Wasen Model Projects

Posted on by
Reply

I’m constantly studying and reviewing information about various types of wasen, or traditional Japanese boats, that I could possibly model. Sometimes it takes a long time, searching for information in books and on the Internet, until I have enough knowledge, drawings, and photos to get started on something.

I spend time researching and studying subjects based on what information I can find. Often, following a lead that takes me to some other website, or maybe suggests the availability of a book that might be useful. In all cases, I travel up an information stream that eventually just dries up. Then, hunting around, I find some information on a different subject, often repetitive, but sometimes providing some information on an altogether different subject.

So, I end up with all these incomplete branches of study. When interest and clues lead to a discovery, or when it just feels like I have enough information and probably won’t find a whole lot more, a project is born. I gather together the information, create drawings or scale existing ones, and start making templates for hull construction.

But, more often, I sit on a potential project, waiting for more information – waiting to decide if I really do have enough information and to decide if I have enough understanding to successfully build a model from what I have. Sometimes, a project is simple enough that I decide I can get started. Sometimes, the potential model size or the details leave me hesitant about how I want to proceed. So, several potential projects sit on my desk and on my computer, waiting for the inspiration to start it.

Well, it seems that the new year has created a lot of inspiration and there are several potential projects to take up. The inspiration has fired off on several of these all at once. Plus, I’ve been tasked with a couple in addition. So, in addition to finishing up the Woody Joe Kitamaebune kit, and adding some more details to my Kobaya from Paris drawings. The following have sprung to life:

Himi Tenmasen – I’ve been tasked with building a model of the small boat that Douglas Brooks and students built with Mr. Mitsuaki Bansho in Toyama prefecture. Originally, the plan was to build two of these for him, but for budgetary reasons, that’s been scaled back to one, plus a Honryousen model (see below).

Honryousen – This project to model a Niigata kawabune is a fallback from plans to build a second Himi Tenmasen for Douglas Brooks. But, in actuality, it would have happened anyway. It’s a pretty simple subject and should be quick to build. The original was built with Mr. Nakaichi Nakagawa.

Senzan maru – This is one of the more ambitious of the projects which I now feel has to see the light of day. This Edo period whaleboat-type craft was owned by the Hachisuka clan of Tokushima prefecture. It is a particularly important project, as it was made possibly by my Japan research trip back in 2016, for which I received a lot of support from friends and family. For this project, I have a book and drawings published by the Tokyo Museum of Maritime Science.

Tonegawa Takasebune – One of the great mysteries to me has been the details of this important river cargo transport of old Edo. There’s much mentioned about these boats which carried food and bulk goods down river to the bustling metropolis of the Japanese capital, but it’s been difficult to find enough technical details to feel comfortable taking on a build of this type. But, the design is actually pretty simple, so I feel there’s no reason to wait on this one any longer.

1/20-scale Hozugawa Kudaribune – I’ve modeled this boat in smaller scale and it’s a beautiful boat. I was planning on sending the 1/40-scale version off as a gift. And, while that gifting is on hold at the moment, I still don’t want to be without a model of this boat, so I’m just scaling up what it did before, but with maybe some adjusted details.

Sekobune – A chaser-type whaleboat is particularly significant right now, as a number of my fellow NRG (Nautical Research Guild) members attended a conference held at the New Bedford Whaling Museum in Massachusetts. As it turns out there is a beautiful model of a Japanese whaleboat on display there that was brought there by one of my Japanese contacts. I was sent many photos of this model by friends in the NRG and offers of assistance from my Japanese contact, who happens to be the curator of the whaling museum in Japan. With a set of plans in hand, this project is calling for me, but at what scale?

 

So, it does all seem to be happening at once. But, that’s not a terrible thing. At least I don’t feel stuck. The Honryou will likely be the first started and finished, since it is such a simple design – It basically only has 5 planks, a beam and some boards that make up a seat. Now, I just have to get some measures for it. Ω

Wood Shipment Received

Posted on by
3

Well, I now have no more excuses on not having enough wood to work with. I just picked up a 12 pound box from the post office, shipped from Japan. I had no idea my wood order was going to be this big and heavy. The whole thing cost me about $100 in wood and another $100 in shipping.

When I got home to open it up, my suspicions were correct that Tanimura-san, my wood supplier, had thrown in a bunch of extra stuff he didn’t need.

So, now, I’ve got plenty of wood in the 3mm and 4mm sizes I need. Plus, a whole bunch in 2mm and even down to 1mm veneer. Not quite sure how I’ll make use of the smallest stuff, but it seems like there ought to be some way I can use it.

The wood is mostly sugi, or Japanese cedar and it’s pretty different from anything that is available in the U.S. It is not actually an ideal wood for model building, because of its grain structure. However, I’m using it to build models as a boatbuilder would. And, I’ve found that the majority of Japanese boat builders tend to use the same wood they use to build there boats. It’s a lot like the way some people like to use real teak for the deck of a sailboat model.

The other wood that is commonly used in Japanese boat models is hinoki, or Japanese cypress. This is the wood you find in all Woody Joe kits, whether ships or temples. In fact, I managed to make a special order from Woody Joe for some standard sized wood that they produce. It’s not something they sell through the hobby channels. I think they produce the wood for Japanese craft suppliers, but I’m not positive about that. But, I was able to get it from them in 2mm, 3mm, and 4mm sheets. They’re not very wide sheets, but for the smaller scale models I would use this for, they should be fine.

For the largest projects I’m considering, I’m going to have to rely on domestically available wood. I should have that covered with a supply of Port Orford cedar I picked up in Oregon a few months ago. I’m going to have to dig into this supply if I’m going to build that 42″ 1/10-scale Japanese whaleboat model I’ve been thinking about(!). Ω

Zutta Tenma in 1/10 scale – Himi Rice Field Boat – Final

Posted on by
Reply

The Zutta Tenma is a small Tabune, or rice field boat, from Toyama prefecture. My model is based on a drawing that I got from Douglas Brooks, which is very similar to one he used when he built one in 2016.

Todate/Transom

The todate or transom on my drawing is in two parts. I could have, made it from a single piece, but I chose to make it in two pieces. Unfortunately, the drawing doesn’t show how these are fastened together. To keep the model simple, I’m assuming that nails of some type were driven down from the top through the short piece of the todate. This is then covered by a board, the name of which I don’t know.

 

On the face of the todate is a carved symbol of the owner. I don’t know a whole lot about these, but was told it was a yago. That doesn’t make a lot of sense to me, as I thought a yago was a house name. The above is a from the plans I’m using. It shows what appears to be twin mountain peaks inscribed in a circle – clearly not a name. The other plan shows what looks like a Chinese character. It looks similar to this one, 又, but it doesn’t make much sense as it is the word mata, which means “also”.

Continue reading →

丸子船 – Marukobune Model by Mr. Masami Sekiguchi

Posted on by
Reply

When I visited Japan in 2016, I had the pleasure of having dinner with a couple Japanese ship modelers in Tokyo. One of these gentlemen is Mr. Masami Sekiguchi of the Yokohama  Sailing Ship Modelers Club. We’ve been regularly in touch via email as he has helped to answer questions for me on Japanese traditional boats, architecture, and anything else I need help with from Japan.

Mr. Masami Sekiguchi, left, visiting a display of wasen models built by Mr. Yukio Nakayama, right.

It was he and the other gentleman I had dinner with in Tokyo, Mr. Norio Uriu, who went and investigated a collection of models at the regional museum in the Ota ward, that I discovered when researching a spreadsheet I found online regarding wasen model dispositions. They took many dozens of photos documenting the models, which were in storage at the museum.

Continue reading →

とやまの和船 – Book on Traditional Japanese Boats of Toyama Prefecture

Posted on by
Reply

The first treasure of my recent Japanese book buying binge arrived late last week. The book is in Japanese and is called Toyama no Wasen, which means Toyama’s traditional Japanese boats.

This is a beautiful book and it is loaded with drawings. I flipped through it and counted about 30 boats detailed in drawings, though some drawings offer more details than others. Also, some of the rice field boats are little more than floating wooden tubs that are pushed or pulled through the fields by the farmer.

This book appears to be a 2011 publication by the Himi City Museum. I found my copy through Yahoo! JAPAN Auctions. I haven’t seen it listed even on Amazon Japan. I suspect it normally purchased directly from the Himi City Museum and, as it’s a museum publication, isn’t going to be found anywhere else.

Continue reading →

Zutta Tenma in 1/10 scale – Himi Rice Field Boat – Part 2

Posted on by
Reply

The Zutta Tenma is a small Tabune, or rice field boat, from Toyama prefecture. My model is based on a drawing that I got from Douglas Brooks, which is very similar to one he used when he built one in 2016.

Photo of the drawings used by Douglas Brooks to build a Zutta Tenma in Himi in 2016. Photo courtesy of Douglas Brooks.

This drawings varies only slightly from one I used, which I believe was published in a museum book on boats of Toyama prefecture. I managed to find a couple of these books on Yahoo! JAPAN Auctions and used my Buyee.com account to purchase it. This, by the way, is a very useful buying service, which allows you to view products in english and ship them to a Japanese address, where they handle the international shipping for you. It’s very easy to use and gives you access to lots of great stuff for sale in Japan.

One of two books on traditional Japanese boats of Toyama prefecture that I just purchased.

Continue reading →

Douglas Brooks Building Honryousen

Posted on by
Reply

American Boatbuilder Douglas Brooks has been studying traditional Japanese boatbuilding techniques from master Japanese craftsmen for more than 25 years. He recently completed building a boat in Niigata prefecture under the guidance of Mr. Nakaichi Nakagawa. The boat is a simple river boat called a Honryousen.

Joining him in Japan is Nina Noah, Director of Student Affairs and Outreach at the Apprenticeshop, a non-profit organization located in Rockland, ME, dedicated “to inspiring personal growth through craftsmanship, community, and traditions of the sea.” She is also working on the boats and helping to document the work being done.

The following video was put together interviewing Mr. Nakagawa and documenting the work on this lovely boat.

 

 

Japanese Book Buying Binge

Posted on by
Reply

While I have plenty of projects and potential projects to work on, I seem to be hungry for new material. Recently, I was hunting for the source of a pdf copy of an out of print book that I had originally obtained from the Nippon Foundation Library a few years ago.

But, try as I might, I couldn’t find it anywhere. In fact, most of my saved links to the site appear to be broken. I hunted for the pdf book, but couldn’t manage to locate it. However, I did manage to run across an actual physical copy on a Japanese auction site. Now, I don’t actually need the book, since I have the pdf file, but it’s always nice to have a physical resource.

The book I found was one on the history of the Takasebune, a term for the various types of shallow-draft transports found on the rivers across Japan. Watch for an upcoming post on researching and reconstructing the Takasebune of the Tone river system.

Continue reading →

Looking for Yodogawa river craft detail

Posted on by
Reply

I haven’t tried this yet with this blog. Normally, I just post what’s new and what I’m working on, etc. But, this time I’m going to try asking for help…

Some Yodogawa 淀川 river boats and some sea boats in the Osaka area show a kind of stern structure that is different from other boat types, but I can’t quite make out the details from the few drawings and photos I’ve seen.

In another case, there is a model of a river gozabune from the Tokyo Museum of Maritime Science. I have some photos of it, but again, nothing that shows the stern in detail. Again, this is a boat from the Yodo river.

This is a beautiful model for which I have a nice drawing, but there is no scale and again I don’t really understand the construction of the stern.

Now, I could take a guess based on the drawings I have, but this is a very well known and often viewed model, so I’m hoping someone out there has some better closeup photos of it. Also, I need the exact length of model or of something specific on the model, as well as the scale, to be able to determine correct measurements.

There might be other models besides this specific one that shows stern features in detail, if you have any info, please contact me here through the comments section. Thank you!